Power Adapter for POE Switch Power Supply
◆10/100/1000M PoE Splitter (5V/9V/12V DC Output)
◆ Provide 5V/9V/12V DC power output
◆ 10/100/1000M data transmission
◆ Compatible with IEEE802.3at standard
◆ Port power can be up to 25.5W
◆ Supply power to IP network cameras through Cat5e cables
◆ Support network port, the power input port features lightning-proof (meet the secondary lightning protection)
◆ Circuit isolation protection design to protect powered devices
◆ No fans, natural cooling, small and exquisite, less heat dissipation
◆ High quality, stable and reliable
A remote power supply device has the following properties:
1 plug and play, do not need to configure the management function
The 2 power supply has the function of input over under voltage, over voltage, over current and short circuit protection.
3 system reliability: MTBF > hours 100K.
4 conducted interference (CE) and radiation interference (RE), in accordance with the CLASS, B EN55022 standard.
1 Working temperature: -35 degrees to 1 degrees 60
2 relative humidity: 5% ~ 90%RH
3 ventilation cooling, cleaning, no conductive dust, no corrosive gas sites
4 places where there is no explosion hazard
5 special attention should be paid to the use of wet environment, especially outdoor equipment, please do not let the rain water and other liquids to flow along the cable into the power supply
Appearance size and weight:
Optfocus Technology now brings you the best quality gigabit poe injector pse802g support oem 30w power supply 802.3af/at for surveillance ip camera from its professional factory. Well-known as one of the leading manufacturers and suppliers of various fiber optical products in China, we can assure you of its good quality and excellent performance.
PAYMENT & SHIPMENT
Each product is packed in a high quality PE bag, Then put into a box or carton and secured by 2 inserts.
Last put each box into pallets and properly wrapped for sea or air voyage.
Standard payment terms: T/T 30% DEPOSIT,70% BANLANCE before shipping.
Online trade assurance order,all is up to you.
More payment terms could be provided(PAYPAL,WESTERN UNION,MONEYGRAM).
Delivery time:Generally it is 1-2 days if the goods are in stock,or it is 2-4 days if the goods are not in stock,it is according to quantity.
CE Certificate CE Certificate FCC Certificate
Supplier Assessment Certificate ISO Certificate
The principle of POE power supply and its power supply process:
1.Initially, the PSE device outputs a very small voltage at the port until it detects that the cable terminal is connected to a receiving terminal that supports the IEEE 802.3af standard.
2. PD device classification
When the receiving device PD is detected, the PSE device may classify the PD device and evaluate the power loss required by the PD device.
3. Start power supply
During a configurable time (typically less than 15μs), the PSE device begins to supply power from the low voltage to the PD device until a 48V DC power supply is provided.
4. Power supply
For the PD device to provide a stable and reliable 48V DC power to meet the PD device does not exceed 15.4W power consumption.
5. Power off
If the PD is disconnected from the network, the PSE will quickly power the PD device (typically within 300 to 400 ms) and repeat the detection process to detect if the terminal of the cable is connected to the PD.
If you find our products interested, please fill the below blank space your detailed requirements. OPTFOCUS’s team would offer different solutions to you within 12 hours. Free samples are also available.Managed Industrial Ethernet Switch manufacturers
website:http://www.optic-solutions.com/industri ... et-switch/
Do you open new MEP? post here with description and rules
1 post • Page 1 of 1